1. Name: KUMAGAI Masaaki

2. Company: 

3. Billing address: 
  email: 
  mail:  same as below

4. Shipping address:

5. Shipping option: 
  Airmail

6. Order: 
  DSQ 1 board, 
  Please panelize 15piece on 1 board
  (design size: 65x70mm, 65x3=195<200, 70x4=280<320)
 
7. Filenames
UNIVIF-H8.TOP:  TOP copper layer
UNIVIF-H8.BOT:  BOTTOM copper layer
UNIVIF-H8.SMT:  TOP Solder Mask layer
UNIVIF-H8.SMB:  BOTTOM Solder Mask Layer
UNIVIF-H8.SST:  component print (silkscreen TOP)
THRUHOLE.tap:   drilling data

additional:
UNIVIF-H8.DRD:  gerber file of drill draw
UNIVIF-H8.LIS:  
   Listing file that was generated by OrCAD Layout 
 
8. Notes: 
* These files are designed and processed by OrCAD Layout.
* The design rule is 0.203mm(8mil) and there are many lines of 8mil.
  (Silk layer has only 0.254mm lines)
* I used drill of 0.700mm, but it seems to be recognized by OrCAD as
  0.027inch instead of 0.028inch (your requirement)
* Limit of drill hole exceeds your limit of 2000.